| 
e-STUDIO163/203 ADJUSTMENT © December 2005 TOSHIBA TEC3 - 263.4.2 Adjustment of image densityThe image density level is adjustable both at standard and toner saving modes.< Adjustment Mode (05) >(1) While pressing [0] and [5] simultaneously, turn the power ON.(2) Key in a code and press the [START] button.(3) Key in the sub code (0, 1, 2, 3 or 4), and press the [START] button.(4) Key in an adjustment value.(To correct the keyed-in value, press the [CLEAR] button.)(5) Press the [INTERRUPT] button to store the value in memory. The equipment goes back to theready state.(6) For resetting the value, repeat step (2) to (5).(7) Turn the power OFF and then back ON to perform printing job.(8) If the desired image density has not been attained, repeat step (2) to (7).Toner mode Item to be adjusted RemarksGDI672-0 to 4 Adjustment of image density When the value is decreased, text becomes lighter.Acceptable values: 0 to 63Notes:1. Set not to reverse the large and small numberof the setting value corresponding to the subcode.Ex.) When the image density level for 672-0,672-1, 672-2, 672-3, and 672-4 is assumed tobe "A", "B", "C", "D", and "E" respectively, theyshould have the following correlation:2. Remember that the image specifications andlife span of the replacing parts may not meetthe standard when the setting value is changedfrom the default value.A B C D E06/11 |
