Sony PCS-G70 Operating Instructions Manual

Also see for IPELA PCS-G70: Function guide Frequently asked questions System integration guide Operation manual Operating instructions

Contents

92 Adjusting the CameraAdjusting the CameraYou can adjust the image shot by the local camera that is sent to the remoteparty to obtain the desired angle and size.During communication you can also control the camera on the remote site toadjust the image shot by the remote camera.Before adjustment, choose whether you control the local or remote camera.1 Press the FAR/NEAR button on the Remote Commander.The Display Control menu appears.2 Press the B or b button on the Remote Commander to select “Control”,then switch between “Far” and “Near” with the V or v button.3 Press the PUSH ENTER button on the Remote Commander.When “Far” is selected (the remote camera is selected), the FAR indicator isdisplayed.When “Near” is selected (the local camera is selected), the FAR indicator doesnot appear.• To control the remote camera, set “Far End Camera Control” to “On” in theCommunication Setup menu. If this setting is not configured properly, you willnot be able to control the remote camera.• You cannot control the remote camera during a session if the remote controlformat of the remote camera is not H.281. If you cannot control the remotecamera, ask the remote party about the remote control format of his camera.• If the local and remote parties try to control the same camera at the same time, thecamera may not operate correctly.Selecting the Camera to be ControlledNotesDisplay ControlDisplayFarControlNearCamera