78 Starting a Conference by Calling a Remote Party9 Dial buttonSelect this button by pressing the V, v, B or b button, and then the PUSHENTER button on the Remote Commander. This starts calling the remote partywhose dial number is entered in the number input box.0 Number input boxTo call a remote party not registered in the Phone Book, select this box bypressing the V, v, B or b button on the Remote Commander, and then enterthe IP address or the ISDN line number.To call a remote party by entering their number directly1 Use the V, v, B or b button on the Remote Commander to select “ Line I/F ” from the launcher menu, then press the PUSH ENTER button. Or pressthe CONNECT/DISCONNECT ( / ) button on the RemoteCommander.2 Use the V or v button on the Remote Commander to select the type of lineto be used, then press the PUSH ENTER button.AUTO: A line for connecting is automatically selected, based on the numberentered in the number text box.IP: Connects to a videoconferencing system on the remote site via a LAN.ISDN: Connects to a videoconferencing system on the remote site via an ISDNline.TEL: Connects to a phone on the remote site via an ISDN line for a voicemeeting.3 Press the V, v, B or b button of the Remote Commander to select thenumber input field, and then the PUSH ENTER button.4 Enter the remote party's IP address or line number.Calling a Remote PartyIP: 012.345.678.678ISDN: 012345678956789TokyoNew YorkParisAUTOPhone BookDetail DialHistoryMenuInformationDialEnter the remote party number.Line type Number text box Dial
