Sony Betacam SX DNW-A65 Operation Manual

Also see for Betacam SX DNW-A65: Specifications

Contents

Chapter 6 Menu System6-16 Chapter 6 Menu System6-3 Extended MenuMenu items in the 700s, relating to video control (Continued)Item number Item name Settings712 VIDEO PROCESS ONCAP LOCK 2FIELDWhen the CAPSTAN LOCK switch on the subsidiary control panel or menu item106 is set to 2FLD for 2-field playback, select whether or not to carry out a“picture shift”.OFF : No picture shift.ON: Carry out picture shift.NoteTo eliminate the adverse effect of the residual chrominance subcarrier componentin the Y signal that is the result of the Y/C separation, this unit automaticallyapplies a shift to the playback image in the H direction, so that even in 2-fieldplayback a satisfactory image can be obtained.713 VIDEO SETUPREFERENCE LEVEL(When operating in 525mode)Set the video setup amounts to be removed from a Betacam playback signal, andto be added to a composite output signal. There are independent settings for aBetacam signal and a composite output signal (referred to below as an outputsignal).NoteThe setup amounts specified in this menu item have no connection with theSETUP (DNW-A65)/ BLACK LEVEL (DNW-A65P) knob on the subsidiary controlpanel.0Sub-ItemMASTER LEVEL When the Betacam playback signal and output signal settings are “MSTER”(master), the setup amount specified for this sub-item is removed from theBetacam playback signal, and is added to the output signal.0.0% ... 7.5% ... 10.0%: Setting in this range, in 0.5% increments.3 BETACAM PBLEVELMSTER : Set the Betacam playback signal to the master setting.0.0% ... 7.5% ... 10.0%: Set the setup amount to be removed from the Betacamplayback signal in this range, in 0.5% increments.4 OUTPUT LEVEL MSTER : Set the output signal to the master setting.0.0% ... 7.5% ... 10.0%: Set the setup amount to be added to the output signal inthis range, in 0.5% increments.714 VIDEO ADJUST RANGE Select the variable range of the VIDEO and CHROMA controls when thePROCESS CONTROL switch on the subsidiary control panel is set to LOCAL.–3~+3 : –3 dB to +3 dBWIDE: –∞ to +3 dB