Sony Betacam SX DNW-A65 Operation Manual

Also see for Betacam SX DNW-A65: Specifications

Contents

Chapter 6 Menu SystemChapter 6 Menu System 6-15Menu items in the 700s, relating to video control (Continued)a) The “Y-add” function is a circuit operation to interpolate the video signal vertically during jog or variable playback for thepurpose of reducing the vertical movement of the playback picture.Item number Item name Settings706 VERTICAL BLANKING VSHIFTWhen the “Y-add” a) function is operative, when the playback signal is an odd fieldand the reference signal is an even field, the playback signal is shifted by 1H (1line) to suppress the vertical movement of the playback picture. This item selectswhether or not to apply a 1H shift to the vertical blanking interval.ON : Carry out vertical blanking shift.OFF: Do not carry out vertical blanking shift.NoteIf the 1H shift is applied during the vertical blanking interval, the signal recordedin line 21 may intermittently appear in jog or variable playback mode.707 FORCED VERTICALINTERPOLATION OFFThe “Y-add” function is normally switched on automatically during jog or variableplayback. This item selects whether or not to force the “Y-add” function off.AUTO : Automatically switch the “Y-add” function on.OFF: Force the “Y-add” function off.709 CAV LEVEL FORMAT Select whether the analog component output should be D-1 or Betacam.(Selectable only in 525 mode)Sub-ItemOUTPUT CAVLEVEL1 Select the analog component output format.B-CAM : BetacamD1: D-1710 INTERNAL VIDEOSIGNAL GENERATORSelect the test signal to be output from the unit’s internal test signal generator.When the selection is other than “OFF”, the internal test signal generatoroperates and outputs the selected test signal.OFF : No test signal is generated. (The unit operates normally.)CB100: 100% color bar signalCB75: 75% color bar signalCB75R: 75% color bar signal (reverse)BOW: Bowtie signalPLSBR: Pulse & bar signalMLTBS: Multi-burst signalHSWP: H sweep signal5STEP: 5-step signalRAMP: Ramp signalSH: Shallow ramp signalRED: Red signalGRAY: 50% flat signalWHITE: 100% flat signalBB: Black burst signalSDI: SDI check field signalNTC7: NTC 7 test signal (selectable only in 525 mode)LN330: Line 330 test signal (selectable only in 625 mode)Format Color bars Y video V sync R–Y/B–YD-1 CAV 100/0/100/0 700 mV 300 mV 700 mVBetacam 100/7.5/77/7.5 714 mV 286 mV 700 mV(Continued)