Sony Betacam SX DNW-A65 Operation Manual

Also see for Betacam SX DNW-A65: Specifications

Contents

Chapter 2 Location and Function of Parts2-16 Chapter 2 Location and Function of Parts2-2 Connector Panel4 Time code output section and audiomonitor signal output section1 TIME CODE OUT connector (XLR 3-pin, male)This outputs a playback time code.By setting extended menu item 606, you can alsooutput the time code from the internal time codegenerator locked to the playback time code.2 MONITOR OUTPUT connectors (XLR 3-pin,male)According to the setting of the audio signal selectionbuttons (see page 2-2) on the upper control panel, two(L and R) audio monitor signals are output.5 Digital audio output sectionAUDIO OUTPUT (AES/EBU) connectors (BNCtype)Output up to two sets (4 channels: channels 1/2 and3/4) of AES/EBU format digital audio signals.3 Digital output section1 SDI (Serial Digital Interface) OUTPUTconnectors (BNC type)These output D-1 format digital video/audio signals.When the CHARACTER switch on the subsidiarycontrol panel is set to ON, connector 3 (SUPER)outputs a signal with superimposed time code, menusettings, alarm messages, and other text information.2 SDTI (Serial Data Transport Interface)OUTPUT connectors (BNC type) (for optional use)These output SDTI (SX) or SDTI-CP video and audiosignals.Using these connectors requires the optional BKNW-118 SDTI (SX) Output Board or BKNW-124 SDTI-CPOutput Board.SDIOUTPUT123(SUPER)SDTIOUTPUT121 SDI OUTPUT connectorsTIME CODEMONITOR OUTPUTOUTR L1 TIME CODE OUT connector2 MONITOR OUTPUT connectorsAUDIO OUTPUT(AES/EBU)CH1/2 CH3/4AUDIO OUTPUT (AES/EBU) connectors2 SDTI OUTPUT connectors