Sony Betacam SX DNW-A65 Operation Manual

Also see for Betacam SX DNW-A65: Specifications

Contents

Chapter 2 Location and Function of PartsChapter 2 Location and Function of Parts 2-52 Display section1 Fluorescent display and indicatorsThis comprises a time data display area 1, a time datadisplay area 2, and a speed display area provided bythe fluorescent display, and also a number ofindicators.BETACAM SXALARMRECGOOD SHOT KEYINHIBITVI TC UB A IN DF LTC VITC 8F 4F 2F CONFI ONCAPSTANLOCKTCG TOTAL REMAIN 525 625 DOLBYNREVENTCHCONDITIONA OUT%SERVO1 Fluorescent display and indicators2 IndicatorsVI TC UB A IN DF LTC VITC 8F 4F 2F CONFI ONCAPSTANLOCKTCG TOTAL REMAIN 525 625 DOLBYNREVENTCHCONDITIONA OUT%Time data display area 1Normally this displays a CTL count, time code value,or user bit value according to the setting of the CTL/TC/UB button in the monitor/menu/display settingsection 1 and the setting of the TC switch in theupper control panel.It is also used to display a STUNT IN point (or PLAYIN point), a duration, error messages, setup menus, andso forth.For details of the selection of CTL count, time code value,or user bit value see the description of the CTL/TC/UBbutton (previous page).Indicator areaTime data display area 1Time data display area 2Speed display area4 TOTAL/REMAIN buttonPress this button to switch between a TOTALindication or REMAIN (remaining) indication on thefluorescent display. According to the selection, theTOTAL indicator or REMAIN indicator above thefluorescent display lights.For details of the TOTAL or REMAIN indicators, see thenext page.5 RESET buttonTo reset a CTL value displayed in the fluorescentdisplay, hold this button down.Resetting the CTL value erases all DMC playbackpoints.