Sony Betacam SX DNW-A65 Operation Manual

Also see for Betacam SX DNW-A65: Specifications

Contents

Chapter 6 Menu SystemChapter 6 Menu System 6-11Menu items in the 100s, relating to the control panels (Continued)Menu items in the 200s, relating to the remote control interface118 KEY INHIBIT SWITCHEFFECTIVE AREASelect which switches and buttons can be operated when the KEY INHIBITswitch on the subsidiary control panel is set to ON. The following sub-itemscontrol different sets of switches and buttons independently.REMOTE SELECTSub-itemSelect whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panelis enabled.DIS : Disabled.ENA: Enabled.2 MONITOR SELECT1Select whether the audio signal selection buttons in the upper control panel areenabled.DIS : Disabled.ENA: Enabled.3 CONTROL PANEL Select which switch and button operations can be carried out from the controlpanel of this unit or an external control panel connected to this unit.DIS : All switches and buttons are disabled.DMC: All switches and buttons for DMC playback operations are disabled.ENA: All switches and buttons are enabled.119 VARIABLE SPEED LIMITIN KEY PANEL CONTROLSelect the playback speed range when carrying out playback in variable modefrom the control panel of this unit.OFF : For a digital tape, from –1 to +2 times normal speed; for an analog tape,from –1 to +3 times normal speed.ON: For both digital and analog tapes, from 0 to +1 times normal speed.Item number Item name Settings201Item number Item name SettingsPARA RUN Select whether or not to use synchronized operation for two or more VTRs(including players).DIS: No synchronized operation.ENA: Use synchronized operation.NoteTo use synchronized operation for two or more VTRs, set item 201 to “ENA” onall of the VTRs.202 CF FLAG (valid only in625 mode)Select the mode for locking to the color framing sent from the remote controller.8F : Eight-field locking mode4F/8F: Four- or eight-field locking mode120 CTL LOCK IN VAR/SHTL Select whether the tape transport should be phase-locked to the CTL signalduring playback in variable or shuttle mode.OFF : Not phase-locked.ON: Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 timesnormal.