Sony Betacam SX DNW-A65 Operation Manual

Also see for Betacam SX DNW-A65: Specifications

Contents

Chapter 6 Menu System6-14 Chapter 6 Menu System6-3 Extended MenuMenu items in the 600s, relating to the time code generatorMenu items in the 700s, relating to tape protectionItem number Item name Settings606 TC OUTPUT SIGNAL INREGEN MODESelect the signal output from the TIME CODE OUT connector during normal (x1)speed playback.TAPE : The playback time code signal is output without regeneration.REGEN: The playback time code is output after regeneration.616 SDTI-CP OUTPUT LTCOVERRIDE (only whenthe BKNW-124 isinstalled)Specify whether or not the LTC signal is inserted into the time code (MPEG2video elementary stream editing information time code) in the MPEG streamwithin the SDTI-CP output signal.DIS : The LTC signal is not inserted.ENA : The LTC signal is inserted.705Item number Item name Settings703 BLANK LINE SELECT Switch blanking on or off for individual lines in the vertical blanking interval. TheY/C signal and odd/even fields are blanked simultaneously.NoteFor playback of an analog Betacam cassette (Betacam SP, etc.) regardless of thesetting of this item, the chrominance signal is blanked up to line 15.Sub-Item0 ALL LINE - - - : Specify the blanking for each line separately.BLANK: Regardless of the setting of other sub-items, blank all lines which can bespecified in this menu item.THROU: Regardless of the setting of other sub-items, switch off blanking for alllines which can be specified in this menu item.12 ...19LINE 12 ... LINE19In 525 mode Specify blanking for lines 12 to 19.BLANK : Carry out blanking.THROU: Switch off blanking.In 625 mode23 LINE 23 Specify blanking for line 23.HALF : Carry out half-blanking.THROU: Switch off blanking.9 ...22LINE 9 ... LINE 22 Specify blanking for lines 9 to 22.BLANK : Carry out blanking.THROU: Switch off blanking.EDGE SUBCARRIERREDUCER MODEDuring playback, in the playback circuit the edge subcarrier reducer (ESR) isautomatically switched on or off according to the operation of the unit. If the coloredges are not as good as with a proper signal, the ESR can be forced on. Thisitem makes this selection.AUTO : ESR is switched on and off automatically.ON: ESR operation is forced on.20 LINE 20 Specify blanking for lines 20.BLANK : Carry out blanking.HALF: Carry out half-blanking.THROU: Switch off blanking.