445 Select “Finalise,” and press ENTER.6 Select “Next Screen,” and pressENTER.For DVD-RW/DVD-R (VR mode), therecorder starts finalising the disc. Go tostep 9.7 (DVD+RW/DVD-RW (Video mode)/DVD+R/DVD-R (Video mode) only)Select a title menu style, and pressENTER.The menu appears in the selected titlemenu style when the “top menu” (or“menu” for a DVD+RW/DVD+R) isselected on the DVD equipment.8 (DVD+RW/DVD-RW (Video mode)/DVD+R/DVD-R (Video mode) only)Select “Yes,” and press ENTER.The recorder starts finalising the disc.9 Press SYSTEM MENU to exit.z HintYou can check whether the disc has been finalisedor not. Press DISPLAY after step 1 (page 39).b Notes• Depending on the condition of the disc,recording, or the DVD equipment, discs may notplay even if the discs are finalised.• The recorder may not be able to finalise the discif it was recorded on another recorder.• Inserting an unfinalised disc into other DVDequipment may damage the recorded contents.• When using a DVD+RW, you can edit or recordon the disc even after finalising. However, thetitle menu will not be displayed. Finalise the discagain to display the title menu.For DVD-RWs (Video mode)DVD-RWs (Video mode) that have beenfinalised to prohibit additional recording orediting can be unfinalised to allow furtherrecording or editing.For DVD-RWs (VR mode)If you cannot record or edit on a DVD-RW(VR mode) that has been finalised with otherDVD equipment, unfinalise the disc.b NoteThe recorder is not able to unfinalise DVD-RWs(Video mode) that have been finalised on anotherrecorder.1 Insert a disc.See “1. Inserting a Disc” on page 34.2 Press SYSTEM MENU.The System Menu appears.3 Select “Disc Setup,” and pressENTER.4 Select “Finalise,” and press ENTER.Unfinalising a disc-RWVR -RW Video
