Sony AT100 Operating Instructions Manual

Contents

32Connecting an External DecoderYou can watch or record external decoder (PAY-TV/Canal Plus analogue decoder)programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’smains lead from the mains when connecting the decoder.To watch the connected external decoder (PAY-TV/Canal Plus analogue decoder)programmes while the recorder is in standby mode, set “Standby Mode” to “Mode 2” in the“Basic” setup (page 118). If not, the picture will not appear.Note that when you set “LINE 1 In” to “Decoder” in step 7 of “Setting external decoder (PAY-TV/Canal Plus analogue decoder) programme positions” (page 33), you will not be able toselect “L1” because Line 1 will become a dedicated line for the decoder.Connecting a decoderTVAerial cable(supplied)SCART cord(not supplied)External decoder (PAY-TV/Canal Plus analogue decoder)to AERIAL OUT to i LINE 1/DECODERDVD recorderto AERIAL INto SCART inputSCART cord(not supplied)to T LINE 3 – TV