4 Organizational tasks 03/20134.1 Maintenance© Siemens AG 2006-2013 All Rights Reserved4-220 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013Fig. 4-3: Executing a maintenance job on the controlFunction Description TypeMaster data Display your own data from the machine masterdata. Where a job is concerned, this may varydepending on the view used for visualization: i.e.whether it is viewed from the perspective of anygiven partner, or, in the case of the maintenancejob list, your own point of view.DISPLAYJob no., jobname, date(due)Unique, consecutive numbers for maintenancejobs which are automatically generated by thesystem in order to avoid misunderstandings incommunicationName of the maintenance schedule which theuser has allocated during configurationExecution time for the maintenance job,calculated by the system according to the basicsettings configured by the userDISPLAYStatus Indicates the status of the job. The status can bechanged by the user at this point.Opening the job should indicate that themaintenance procedures required in the job havealready been carried out.Closing the maintenance job corresponds toacknowledging it; here it can be determinedwhether the maintenance procedures wereperformed successfully.Important:Even when the display has a particular status, itis not actually set to this. In each case, the statusSELECTION
