03/2013 2 Machine information2.1 Machine overview© Siemens AG 2006-2013 All Rights ReservedSINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013 2-212.1.2 Machine events - List viewFunction descriptionYou can view events for the selected machine in a list under "Machine events" inthe "Machine information" area.Examples:• Events from Control Monitor Services- Alarm or PLC events- Fault processing request- Cyclic events (time-based triggers)Events that have been configured by control monitors with the identification"Without entry in the machine events" do not generate an entry, and theirdetails cannot be viewed either.• Events from condition monitor services- Exceeded interval limits of variable monitors- Limit value violation for measurement series / test series• System events- NC/PLC archives created- Service sessions performedYou can view additional diagnostic information or triggered workflow serviceselements for each event, and evaluate it (in some cases graphically):• Workflow services elements- Transmitted notifications (SMS / e-mail)- Generated maintenance jobs- Service cases• Diagnostics data- Files- HMI action log- Machine data- NC status data- Feedback messages to the PLC- PLC trace- PLC data blocks- PLC monitors- Variable monitors- ArchivesTo ascertain differences between machine data, NC status data, and data of theHMI action log, you can compare this data with data of the same type for severalevents on the same machine.
