3 Setting up functions 03/20133.4 Fault services© Siemens AG 2006-2013 All Rights Reserved3-166 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013Function Description TypeIf there are no entries and no common start dateis found, then a message is output to enter adate.If participation in common start date is selected,you cannot make any entries here.When you select the calendar field, the calendaropens to display the current month.You can navigate through the months in thecalendar via the arrows. Select a number to usethe date as the start date.The date is limited to 24 months in the futureand 24 months in the past.If participation in common start date is selected,you cannot make any entries here.SELECTIONStart time The starting time for the trigger can be specifiedin hours and minutes.If no entry is made, the actual clock time that isalready pre-assigned is applied.DISPLAYINPUT(Time formatwith leadingzeros)Common startdateTriggerparticipatesIf participation in common start date is selected,the time is automatically set.Even if the common start date is subsequentlychanged, it is automatically corrected.The start date can only be selected if triggerparticipates in common start date is deselected.DISPLAYSELECTION(Toggle)Next trippingoperationTo check the trigger time, the moment of thenext initiation is shown with date and time.DISPLAYType of the interval- All- Weekly- MonthlyThe type of interval must be clearly selected.You can only select one of the three options.DISPLAYSELECTION(Toggle)All Enter a cycle 'n' in the selected time unit- Seconds (at least 5)- Minutes- Hours- DaysThe intervals that can be selected are restrictedto one or more days of the week, Monday toFriday and a time window for the selected daysof the week.The interval runs regardless of the deselectrestriction.At the end of the interval, the trigger will beactivated in the selected time window of the dayand time.DISPLAYINPUTSELECTION(1 to 99 999minutes orhours)
