Sharp SPC562 Instructions & Warranty

INSTRUCTIONS & WARRANTYModel# SPC562Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufactureof your clock. Please read these instructions carefully and store them in a safe place for future reference.FRONT OF CLOCK BACK OF CLOCKPMP MLOCKALARMTIMEAL OFFBEEPVIBRATEALLU 4 AAA R0 3DC1 .5 VMU 4 AAA R0 3DC1 .5 VMUM4 AAA R0 3DC1 .5 VFOR CLOCKMODEL: SPC562 MADE IN CHINAHOUR MINPFOR ALARMFOR ALARMSNOOZE BUTTONTIME DISPLAYALARM TIME DISPLAYPM INDICATORALARM PM INDICATORALARM INDICATORSNOOZE INDICATORMINUTE BUTTONHOUR BUTTONALL / VIBRATE / BEEP /AL OFF SWITCH TIME / LOCK / ALARMSET SWITCHSETTING THE TIME1. Slide the TIME/LOCK/ALARM set switch to TIME position.2. Press the HOUR button intermittently. Pressing and releasing the HOUR button will advance the hour in one hour incrementPress the hour button until correct hour is displayed.Note: When setting the hour be sure you are in the correct AM or PM time period. When the “PM” indicator appears on thedisplay, the time displayed is in the 12 hour period between 12:00 noon and midnight.3. Press the MINUTE button intermittently. Pressing and releasing the MINUTE button will advance the minute in one minuteincrement. Press the minute button until correct time is displayed.4. Slide the TIME/LOCK/ALARM set switch to LOCK after setting your time.SETTING THE ALARM TIME1. Slide the TIME/LOCK/ALARM set switch to ALARM position.2. Press the HOUR button intermittently. Pressing and releasing the HOUR button will advance the hour for the alarm time inone hour increments. Press the HOUR button until correct alarm hour is displayed.Note: When setting the hour be sure you are in the correct AM or PM time period. When the “PM” indicator appears on thedisplay, the time is displayed in 12 hour period between 12:00 noon and midnight.3. Press the MINUTE button intermittently. Pressing and releasing the MINUTE button will advance the minute for thetime in one minute increments. Press the minute button until correct alarm time is displayed.4. Slide the TIME/LOCK/ALARM set switch to LOCK after setting your alarm time.ACTIVATING THE ALARM FUNCTION1. Slide the ALL/VIBRATE/BEEP/ALARM ON/OFF switch to BEEP position for choosing sound alarm.The ALARM ON indicator will appear alarm on LCD display indicating the alarm is activated.2. Slide the alarm on/off switch to VIBRATE position for choosing vibration alarm.3. Slide the alarm on/off switch to ALL position for choosing both vibration & sound alarm.4. To turn the alarm off, slide the alarm on/off switch to the OFF position. The ALARM ON indicator will no longer appearon LCD display indication the alarm is de-activated.Features:LCD display with PM indicatorAlarm and 5 minute snoozeVibration Alarm or Beep AlarmSoft display backlight for night viewingRequires 3 X AAA batteries (not supplied)INSTALLING OR REPLACING THE BATTERY.1. Remove the battery compartment cover located on the back of the clock by using your index finger to gently pull down onthe latch until you feel the cover release and open.2. Install three “AAA” alkaline batteries into the battery compartment. Make sure the polarity is correct by following the (+ or -)symbols engraved inside.3. Replace the battery compartment cover.

/ 2

Related manuals for Sharp SPC562