Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 iDCS Keyset User Guide– 58 –PERSONAL SPEED DIAL NAMESEach personal speed dial number you create can have a name of up to 11characters assigned to it. This name is used to select the speed dial binwhen you use the Dial by Directory feature (see below). To program speeddial names:1. Press the Transfer key and dial 106.2. Dial the speed dial number 00–49.3. Enter the name using the procedure described in Setting ExtensionNames, above.4. Press the Transfer key to store the speed dial name.5. Repeat for each speed dial number as required.DIAL BY DIRECTORY (NAME)Each extension or speed dial number can have an associated directoryname, as described above. Where this is the case, an extension or speeddial number can be selected by scrolling alphabetically through a directoryname list. This on-line “phone book” allows you to look up and dial any ex-tension or speed dial number quickly.1. Press the DIR key or select the DIR soft key from the CALL menu.2. Select the directory you wish to search: PERS (personal speed dialnumbers), SYS (system speed dial numbers) or STN (extension names).3. Press the key that corresponds to the first letter of the name you wish tosearch for.4. Press the Volume keys to scroll through the names. (If no list exists forthe letter selected, the system will tell you.)5. Press the DIR key or the DIAL soft key to dial the number.DISPLAY NUMBER DIALLEDDisplay keysets show digits as they are dialled. They will stay in the displayuntil the call duration timer comes on automatically or the TIMER key ispressed (see below). If the call duration timer is not used, the number dialledis displayed until the call is released, transferred or put on hold.