Samsung iDCS500 iDCS Keyset User Guide– 39 –PROGRAMMED MESSAGESWhen you plan to be away from your phone for any length of time, you canleave a programmed station message on your phone’s display (e.g. “In aMeeting”). Display keysets calling you will also see this message. The mes-sage may also contain instructions for callers to follow. In ‘L’ version systemsthere are 30 possible messages (01–30). In ‘M’ version systems there are 20possible messages (01–20). Messages 01–10 are set up by default as fol-lows (the rest are blank):01 GIVE ME THE CALL02 TAKE A MESSAGE03 ASK THEM TO HOLD04 SEND TO MY VOICE MAIL05 TRSF TO MY SECY06 LEAVE A MESSAGE07 PAGE ME08 OUT OF TOWN09 IN A MEETING10 I WILL CALL BACKEach of these default messages and the blank messages can be customisedin programming as required. To see what messages have been set up foryour system:• With the handset on-hook, dial Transfer 115• Use the Volume keys to scroll through the programmed message op-tions.PROGRAMMED MESSAGE KEYSYou may have message (PMSG) keys programmed on your keyset, eachwith a different message code as an extender. If so:ß Press the PMSG key you require. The message is set and the key willlight red. Press the key again to turn the LED off.ß Pressing a different PMSG key will turn the previous message off and seta new message.
