Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 iDCS Keyset User Guide– 51 –CHANGE YOUR PASSCODEBy default, your extension passcode is 1234. You can change this passcodeto any 4-digit number. You may be required to do this in order to use somespecial features.1. While on-hook, dial Transfer 101.2. Dial your existing (old) passcode.3. Dial a new passcode (must be four characters, e.g. 3456). You can usenumbers 0–9.4. Redial the new passcode to verify. If successful, you will hear two beeps.(Four beeps indicate an invalid code and you should enter the codeagain.)5. Press the Transfer key to store the new passcode.SET ANSWER MODEYou can receive internal calls in one of three modes: Ringing, Auto Answer orVoice Announce (see Answering Internal Calls in the section “Internal Calls”for details).1. While on-hook, dial Transfer 103.2. Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce. (Or usethe Volume keys to select the option in the display.)3. Press the Transfer key to store your selection.AUTOMATIC HOLDWhile on an outside call, pressing a line key, route key or a flashing Call keywill automatically put your call on hold and connect you to the next call. Thisfeature can be turned on or off at your keyset.1. While on-hook, dial Transfer 110.2. Dial 001 to turn Automatic Hold on or 000 to turn it off. (Or use the softkeys and Volume keys to select the option in the display.)3. Press the Transfer key to store your selection.