CHAPTER 5. Maintenance OfficeServ 500 Wireless LAN Service Manual/Ed.00Page 5-18 © SAMSUNG Electronics Co., Ltd.3 Upgrading the 8WLI S/W3.1 Connecting the Console Terminal to the 8WLI Card1) In order to upgrade the 8WLI card software, either PC with the terminalemulation on, such as a console terminal, or an ASCII terminal like VT-100 andVT-220 types is used. When connecting the console terminal to the 8WLI card,the console cable with 9-pin RS-232C connector as shown below is used.Figure 5.17 Connecting Cable of the Console Terminal2) Connect one end of the console to the RS-232C connector of the 8WLI card, andconnect the other end to the serial port of the console terminal(PC).Figure 5.18 Connecting the Console Terminal to the 8WLI CardRS-232C connectorConsole cableConsole terminal
