CHAPTER 5. Maintenance OfficeServ 500 Wireless LAN Service Manual/Ed.00Page 5-24 © SAMSUNG Electronics Co., Ltd.13) Select [2] menu to load the WLIROM..HEX file. Then the following messagewill show up.Selected 1> Single- WLI HEX FILE LoadingPlease Start Loading !!14) Perform No.6)~No.10) as shown above and upload the MWLIROM.HEX file.Select the MWLIROM.HEX file instead of the WLIROM.HEX file. Afteruploading the MWLIROM.HEX file, the following message will show up.================HEX FILE INFORMATION ====================HEX FILE START ADDR = 0x00110000HEX FILE END ADDR = 0x0012465DHEX FILE TOTAL LEN = 0x0002465D------------ FLASH MEMORY WRITE START ---------------------STEP 1. SECTOR ERASE ÆSUCCESSSTEP 2. PROGRAM WRITE Æ SUCCESS----------- FLASH MEMORY WRITE END ----------------------Please [R] key to Restart or [L] key to Loading Again !!The message can be different according to the WLI software version. If ‘FlashMemory Write End’ shows up, it means that uploading is successfullycompleted.15) Click [R] and restart the 8WLI card. If the file is normally transmitted, thefollowing main window will show up.******************************************* VoWLAN Console < 8- Port WLI Board > *******************************************
