OfficeServ 500 Wireless LAN Service Manual/Ed.00 CHAPTER 3. Installation© SAMSUNG Electronics Co., Ltd. Page 3-137 Positioning the WBS24This section introduces the cell in where the WBS24 will be installed, and describesthe data transmission rate affected by the terminal’s location.7.1 Cell OverviewThe Figure 3.10 below illustrates the wireless transmission range of the WBS24.Theoretically, the range of a cell is presented as a circle, but in reality, the shape maybe altered depending on the surrounding environment such as the location of theWBS24 or the surrounding structures.The boundary of a cell normally indicates the frequency range of WBS24, butactually, it should be perceived as a wireless service range and a boundary where ahand-off function to another cell is possible.The WIP-5000M is always connected to WBS24 within the cell range, and evenwhen the WIP500M is in an overlapped range between cells, the WIP500Mmaintains communication with one cell at a particular time.Figure 3.12 The Cell Boundary of WBS24Cell Boundary
