Samsung MULTIXPRESS CLX-9251 Series Service Manual

Also see for CLX-9201 Series: User guide User guide Service manual

4. Troubleshooting• Diagnostics > Adjustment > Print Adjustment > Image PositionPurpose To correct image position of print-outs manually.Operation Procedure 1) Select a tray required adjustment.2) Change the adjustment value with arrow button. “+” value will move to Tail-Edge while“-” value will move to Lead-Edge.ExampleCasesSimplexLeadingEdgeSimplexSide EdgeDuplexLeadingEdgeDuplexSide Edgeùù = 8.5 mm + 15ûû = 11.6 mm -16°° = 8.0 mm + 20¢¢ = 13.0 mm -30Verification Print out and check if all the position of scale marks (,,,) in the image are located within the specifiedlimit.Specification a, b, e, f : 10 mm, ± 1.5 mmReference Scanner A/S ChartCopy Adjustment• Diagnostics > Adjustment > Copy Adjustment > Image PositionPurpose To correct image position of copied images manually.Operation Procedure 1) Select a tray required adjustment.2) Change the adjustment value with arrow button. “+” value will move to Tail-Edge while“-” value will move to Lead-Edge.ExampleCasesSimplexLeadingEdgeSimplexSideEdgeSimplexLeadingEdgeSimplexSideEdgeùù = 11.5 mm -15ûû = 8.4 mm -16°° = 12.0 mm -20¢¢ = 7.0 mm + 30Verification 1) Copy the Scanner A/S Chart . Scanning must be occur at the scanner glass .2) Check if all the position of scale marks (a, b, e, f) in the image are located within thespecified limit.Specification a, b, e, f : 10 mm ± 1.5 mmReference Scanner A/S Chart4-33 Copyright© 1995-2016 SAMSUNG. All rights reserved.