USING PRINT MATERIALS 4.194Printing on Transparencies1 Open the Multi-Purpose Tray and the rear output tray.2 Load transparencies with the print side up, and the topwith the adhesive strip entering the printer first.Adjust the guide to fit the width of the transparencies.Guidelines• Only use transparencies recommended for use in laserprinters.• Ensure that transparencies are not wrinkled, curled, or haveany torn edges.• Hold the transparencies by the edges and avoid touching theprint side. Oils deposited on the transparency can cause printquality problems.• Be careful not to scratch or leave fingerprints on the printside.