Menu
Samsung ML-2550 User Manual
Also see for ML-2550: Product guideSolution guideUser guideManual Del UsuarioUser guide
                                                                                                                                                                                                                                         |
USING YOUR PRINTER ON A NETWORK E.9E11 Press the Enter button ( ) to access the IP Addressmenu.IP address consists of 4 bytes.12 Press the scroll button ( or ) to enter a numberbetween 0 and 255 and press the Enter button ( ).13 Repeat Step 12 to complete the address from the 1st byteto the 4th byte.14 To select other parameters, such as Subnet Mask orGateway, press the Upper Level button ( ), then use thescroll button ( or ). Press the Enter button ( ).15 Repeat steps 12 and 13 to configure the other TCP/IPparameters.16 Press the ON Line/Continue button ( ) to return toready mode.Dynamic Addressing (BOOTP/DHCP)To assign the TCP/IP address automatically by the server, takethe following steps:1 In ready mode press the Menu button ( ) until you see“Network” on the bottom line of the display. Press the Enterbutton ( ) to access the menu.2 Press the Enter button ( ) when “Config Network”displays on the bottom line.3 Press the scroll button ( or ) to display “Yes” andpress the Enter button ( ).4 press the Upper Level button ( ), then use the scrollbutton ( ).5 Press the Enter button ( ) when “Config TCP” displays.Enter a number between 0and 255 for each byte. |
Related manuals for Samsung ML-2550
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved