P ROGRAMME INSTALLING PRINTER OPTIONS F.11F4 Align the printer with the support unit and lower it intoplace on the tabs.5 Plug the cable into the connector on the back of the printer.6 Load paper in the Tray2. For information about loadingpaper in the tray, see page 2.6.7 Reconnect the power cord and cables and then turn theprinter on.NOTE: When you print a document, configure the printer driverfrom your application. To access the printer driver, see page 5.2.CAUTIONS:Do not remove Tray 1 from the printer while you areprinting using the optional Tray 2. If you do this, a paper jam mayoccur. Use the optional Tray 2 with Tray 1.