Samsung MIM-E03EN User Manual

Also see for MWR-WW10N: Installation manual User manual Installation manual Service manual

43EnglishField Setting ModeSmart Grid ControlNOTE࡙ MIM-E03CN(MONO Control Kit) model does not support this Smart grid function.The FSV #5091 should be set to "1(Yes)" for Smart Grid control.FSV 0 1#5091 Disable (Default) ActivationOperation mode for Smart GridOperation Mode Terminal 1 Terminal 2Mode 1 Short OpenMode 2 Open OpenMode 3 Open ShortMode 4 Short Short࡙ Mode 1 : Forced thermo off operation of all system࡙ Mode 2 : Normal operationIt is equally applied both heating and hot water mode.࡙ đͱʒʪߤࡠĘͱθ͔ɇ̷ͱΧʪθɇϩ̈ͱ࣍͝ƊǤߣߪߡߦࢄॉߣঐࡡƊǤߤߪߡߦࢄॉߦঐࡡUʪ ˙ɇЇ̷ϩ࣎The heating and hot water setting temperature are set by the FSV setting value. ࣕHeating mode (Room sensor setting) : Current setting value + FSV #5092ࣕHeating mode (Water outlet setting) : Current setting value + FSV #5092ࣕHeating mode (Water law setting) : Current setting value + FSV #5092ࣕHot water mode : Current setting value + FSV #5093࡙ Mode 4 : When operating on, the setting temperature is reflected as follows.Hot water mode ࣕߥߪߡߦࢄॉߡࡠƟɇθ˝ʪϩϑʪϩϩ̈͝˝ϩʪ͔ΧʪθɇϩЇθʪ̈ϑߦߦঐࢋ ࣕࡠߢॉߥߪߡߦࢄƟɇθ˝ʪϩϑʪϩϩ̈͝˝ϩʪ͔ΧʪθɇϩЇθʪ̈ϑߡߨঐࢋ[If FSV #3031 is 0 (no use booster heater) or DHW mode is economic mode, it does notactivate booster heater.]Heating mode ࣕ²ʪɇϩ̈͝˝͔ͱʒʪ࣍ŵͱͱ͔ϑʪ͝ϑͱθϑʪϩϩ̈͝˝࣎ࡠAЇθθʪ͝ϩϑʪϩϩ̈͝˝Эɇ̷Їʪफ़ ࣎ߢߥߡߢࢄƊǤ࣍đɇуॉঐߤफ़ߣߪߡߦࢄƊǤ ࣕ²ʪɇϩ̈͝˝͔ͱʒʪ࣍ǮɇϩʪθͱЇϩ̷ʪϩϑʪϩϩ̈͝˝࣎ࡠAЇθθʪ͝ϩϑʪϩϩ̈͝˝Эɇ̷Їʪफ़ ࣎ߢߤߡߢࢄƊǤ࣍đɇуॉঐߦफ़ߣߪߡߦࢄƊǤ ࣕ²ʪɇϩ̈͝˝͔ͱʒʪ࣍Ǯɇϩʪθ̷ɇиϑʪϩϩ̈͝˝࣎ࡠAЇθθʪ͝ϩϑʪϩϩ̈͝˝Эɇ̷Їʪफ़Ɗ ঐߦफ़ߣߪߡߦࢄǤ(Max=FSV #2021, #2022, #2031, #2032)