Samson Resolv 120a Owner's Manual

Also see for 120A: Product specification sheet Owner's manual Owner's manual

Contents

Samson Resolv 120a Owner's Manual Manual pdf 17 page image

17Connecting the RESOLV 120aUsing the RESOLV 120a with the Samson DMS80 Monitor SystemThe RESOLV 120a is a great add on to your DMS monitor system providing extended low frequency output. There are sev-eral ways you can interface your new subwoofer to the DMS80, including using the DMS80’s mono SUB OUT, or by usingthe DMS 80’s LINE OUTs. The following examples outline the connections and operation for the RESOLV 120a workingwith the DMS80 system.SPEAKER OUTPUTSLEFT+ LEFT- RIGHT+RIGHT-SPEAKER IMPEDANCE 4-8 LINE IN AUX INSAMSON DESKTOP MONITOR SYSTEM STEREO 40W X2 MODEL:DA80 MADE IN CHINALINE OUT SUB OUTMONOSERIALNUMBERRISK OF ELECTRIC SHOCKDO NOT OPENWARNINGDO NOT EXPOSE THIS EQUIPMENTTO RAIN OR MOISTUREAVISRISQUE DE CHOC ELECTRONIQUENE PAS OUVRIRCAUTIONFOR CONTINUED PROTECTION AGAINST RISKOF FIRE, REPLACE ONLY WITH SAME TYPE FUSEATTENTIONUTILISER UN FUSIBLE DERECHANGE DE MÊME TYPERIGHTLEFTRIGHTLEFTRIGHTLEFTINPUT– +INPUT– ++––+10 Inch Long Throw Transducer120 Watt Amplifier• Make the connections between your mixer and your DMS80 monitor system as described in the DMS80’s users man-ual and make sure that you turn your mixer all the way down.• Connect the SUBWOOFER OUTPUT located on the rear panel of the DMS80 to the RIGHT PREAMP INPUT on theRESOLV 120a.• Set the RESOLV 120a’s Volume control to about 6, and since the DMS80’s SUBWOOFER OUTPUT is High-passed at 100Hz, set the SWEEP control to 180Hz.• Now run some audio, like music on a CD, through your mixer and raise the level that controls the output connectedto the DMS80 monitor system until you reach a comfortable listening level.• Now slowly raise the SUBWOOFER LEVEL control located on the DMS80 front control panel and adjust the low fre-quency output to your taste. You can experiment with the balance between the RESOLV 120a and the DMS satellitespeakers by adjusting the SUBWOOFER LEVEL control. Once you find the balance you like, the RESOLV 120a will trackthe satellites when you raise or lower your mixer’s output.Using The DMS80’s SUB OUTENGLISH