|
11–Converged Network Adapter Interactive CommandsDisplay FCoE Port Link Status11-130 SN0054667-00 GCNA Model : QLE8242CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)FW Version :WWPN : 21-00-00-0E-1E-04-95-EBWWNN : 20-00-00-0E-1E-04-95-EBLink : Online=======================================================1: Display Test Parameters2: Reset Test Parameters3: Configure Test Parameters4: Display Link StatisticsDisplay Test Parameters5. Adapter Statistics1. Converged Network Adapter5. Display FCoE Port Link Status1. DisplayTest ParametersFrom the Link Statistics Menu, select the Display Test Parameters option to viewlink status logging parameters. For example:---------------------------------------Link Status Settings---------------------------------------AutoPoll (AP): 10SetRate (SR): 5LogToFile (LF): N/AReset Test Parameters5. Adapter Statistics1. Converged Network Adapter5. Display FCoE Port Link Status2. ResetTest ParametersFrom the Link Statistics Menu, select the Reset Test Parameters option to resetthe link status logging parameters to their default values.Configure Test Parameters (-ls)5. Adapter Statistics1. Converged Network Adapter5. Display FCoE Port Link Status3.Configure Test ParametersFrom the Link Statistics Menu, select the Configure Test Parameters option toopen the Link Statistics submenu with options to specify the polling method, thepolling rate, and the name of the log file. For details about these parameters, seeTable 6-8 on page 6-24. For example:Configure Test Parameters Menu=======================================================
|
