11–Converged Network Adapter Interactive CommandsLink Test11-108 SN0054667-00 GLink Test4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model5. Link TestFrom the Converged Network Adapter (CNA) Diagnostics menu, select the LinkTest option. From the port menu, select a port to test the links. For example:Converged Network Adapter (CNA) DiagnosticsCNA Model QLE8242 SN: AFE1028C038991. Port 1 [Protocol(s): NIC iSCSI FCoE]MAC Address: 00:0E:1E:04:95:E8WWPN: 21-00-00-0E-1E-04-95-EBPort iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online2. Port 2 [Protocol(s): NIC iSCSI FCoE]MAC Address: 00:0E:1E:04:95:ECWWPN: 21-00-00-0E-1E-04-95-EFPort iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)Please Enter Selection: 2Link Test Starts ...Test Status: Failed (Passed=0, Failed=1, ErrorCode=1)Link Test Results:Status=FailedPassed=0, Failed=1, ErrorCode=1Loopback Test4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model6. Loopback TestFrom the Converged Network Adapter (CNA) Diagnostics menu, select theLoopback Test option. From the port menu, select a port to open the LoopbackTest menu with options to test NIC, FCoE, and iSCSI functions. For example:Converged Network Adapter (CNA) DiagnosticsCNA Model QLE8242 SN: AFE1028C038991. Port 1 [Protocol(s): NIC iSCSI FCoE]NOTE Currently, QConvergeConsole CLI supports only the FCoE loopbacktest. This test requires that the port has a loopback plug installed.
