10–Fibre Channel Interactive CommandsAdapter Alias (-ha)SN0054667-00 G 10-7Adapter Alias (-ha)2. Adapter Configuration2. Fibre Channel Adapter1. Adapter AliasFrom the Fibre Channel Adapter Configuration menu, select the Adapter Aliasoption. From the adapter menu, select an adapter to view or change its adapteralias. The adapter’s identifying information is displayed followed by a promptidentifying the current adapter alias in brackets. To change the adapter alias, enterthe new value and press ENTER. (If you do not want to change the alias, justpress ENTER.) The following is an example of changing the adapter alias from 0to 1:Fibre Channel Adapter Configuration1: HBA Model: QLE2562 SN: GFC0819H89653Port 1 WWPN: 21-00-00-1B-32-0C-95-0C Link DownPort 2 WWPN: 21-01-00-1B-32-2C-95-0C Link Down(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)Please Enter Selection: 1=======================================================HBA Model : QLE2562HBA Desc. : QLE2562 PCI Express to 8Gb FC Dual ChannelHBA SN : GFC0819H89653HBA Alias : 0=======================================================HBA Alias [0]: 1Update completed. Changes have been saved to HBA WWNN 20-00-00-1B-32-0C-95-0C!Hit to continue:NOTEThe options supported and available on the Fibre Channel AdapterConfiguration menu depend on the drivers and operating system detected.You may not see all of the options listed above and described in this sectionof the guide.
