Pioneer PDP-425CMX Technical Manual

Also see for PDA-5003: Technical manual Operating instructions Operating instructions

Contents

6Power requirementsPDP-425CMX .......................... AC 100 V to 120 V, 50/60 HzPDP-42MXE10 ........................... AC 100 V to 240 V, 50/60 Hz(The power unit range is from AC100 V to 240 V (50/60 Hz))In-rushPDP-425CMX ................................................. less than 30 APDP-42MXE10 ................................................. less than 50 APower factor .................................................... more than 0.95ConsumptionPDP-425CMX ...................... 285 W(NOTE 2) (1.2 W in standby)PDP-42MXE10 .................... 360 W(NOTE 2) (1.5 W in standby)External dimensions (not including the handles and supplied stand)........................... 1022 mm (W) × 610 mm (H) × 98 mm (D)40-1/4 in. (W) × 24-1/32 in. (H) × 3-27/32 in. (D)Weight (without attachment stand) ......... 30.5 kg (67.3 lbs.)Dimensions of packaging......................... 1177 mm (W) × 767 mm (H) × 354 mm (D)46-11/32 in. (W) × 30-7/32 in. (H) × 13-31/32 in. (D)Weight when packaged ................................. 38 kg (83.8 lbs.)Operating Temperature .... 0 °C to 40 °C (32 °F to 104 °F)(NOTE 3)Operating Humidity .......................................... 20 % to 80 %Operating atmospheric pressure .......... 800 hPa to 1114 hPaStorage limitations (when installed)Temperature .................. –20 °C to +60 °C (–4 °F to 140 °F)Humidity ......................................................... 20 % to 90 %Atmospheric pressure ......................... 700 hPa to 1114 hPaStorage limitations (when in original package)Temperature ................ –30 °C to +60 °C (–22 °F to 140 °F)Humidity ......................................................... 20 % to 90 %Atmospheric pressure ......................... 700 hPa to 1114 hPaStacking ............................................ Fewer than three tiersStandard accessoriesPower cord .............................................................................. 1Ferrite core (for power cord) ................................................... 2Ferrite core (for audio cables) ................................................. 3Cable tie .................................................................................. 2Remote control unit ................................................................ 1AA battery ............................................................................... 2Wiping cloth (for screen) ......................................................... 1Speed clamp ........................................................................... 5Operating instructions ............................................................. 1Warranty (PDP-425CMX only) ................................................. 1Remote control unit holder ..................................................... 1Display stand ........................................................................... 2Washer .................................................................................... 2Hexagon socket head screw (M8 x 40) .................................. 2Specifications and external designs are subject to change withoutnotice.(NOTE 1) The display is preset at the factory to 9600bps. Thissetting can be changed using either the remote controlunit or a PC.(NOTE 2) Allow for 320 W = 320 VA of consumption per unit.(NOTE 3) The correct operating environmental temperature mayvary depending on the installation site. (Refer toInstallation Site Requirements.)2.1 SpecificationsLight-emitting panel ..................... 42V type AC Plasma Panel92.16 cm (W) × 51.53 cm (H) × 105.59 cm (diagonal)Aspect ratio .................................................................... 16 : 9Pixels ...................................................................... 1024 × 768Pixel pitch ..................... 0.9 mm (H•RGB trio) × 0.671 mm (V)Input/output terminalsVideo-relatedINPUT 1Input Mini D-sub, 15-pin connector (female)• RGB signal (for SYNC ON G)RGB ............................... 0.7 Vp-p/75 Ω/no syncHD/VS, VD ........ TTL level/positive and negativepolarity/2.2 kΩSYNC ON G ............ 1 Vp-p/75 Ω/negative sync.*Microsoft Plug & Play (VESA DDC 1/2B) supportedOutput Mini D-sub, 15-pin connector (female).................................. 75 Ω/with bufferINPUT 2Input DVI-D 24-pin connectorDigital RGB signal (DVI compliant TMDS signal)*Microsoft Plug & Play (VESA DDC 2B) supportedAudio-relatedInput AUDIO INPUT (for INPUT1)Stero mini jackL/R ...................... 500 mVrms/more than 10 kΩAUDIO INPUT (for INPUT2)Stero mini jackL/R ...................... 500 mVrms/more than 10 kΩOutput AUDIO OUTPUTStero mini jackL/R .......................... 500 mVrms/less than 5 kΩSPEAKERL/R ................... 6 Ω to 16 Ω/8 W + 8 W (at 6 Ω)Control-relatedRS-232C terminal: D-sub, 9-pin (male)(NOTE 1)Combination In/Out Terminal: Mini-DIN, 6-pinSpecifications