83Reset the settings/Reboot the camera [Default reset]Click the [Default reset] tab of the "Maintenance" page. ( pages 20 and 21: How to display/operate the setupmenu)The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed on thispage.[Reset to the default (Except the network settings)]Click the [Execute] button to reset the settings to thedefault. Note that the network settings will not be reset.It is impossible to operate the camera for around 2 min-utes after the initialization.[Load the default HTML files (setup menu).]Click the [Execute] button to reset the HTML files to thedefault.It is impossible to operate the camera for around 2 min-utes after the initialization.[Reset to the default and load the default HTMLfiles.]Click the [Execute] button to reset the settings of thecamera and the HTML files to the default. Note that thenetwork settings will not be reset.It is impossible to operate the camera for around 2 min-utes after the initialization.[Reboot]Click the [Execute] button to reboot the camera. It isimpossible to operate the camera for around 2 minutesafter rebooting the camera.Note:• To initialize the network settings ( page 72), turnon the power of the camera while holding down the[INITIAL SET] button on the camera. The settingsincluding the network settings will be initialized. Waitaround 2 minute after releasing the button. The cam-era will start up and the settings including the net-work settings will be initialized.• The notification function allows users to provide thenotification of the error to the specified mail addressand an original alarm destination when an error suchas no SD memory card insertion after the reboot or alocked SD memory card insertion occurs. ( pages61 and 62)
