68Configure the settings relating to the priority stream [System]Click the [System] tab on the "User mng." page. ( pages 20 and 21: How to display/operate the setup menu)The description below is the configuration of the priority stream that can transmit images without deteriorating theimage quality and refresh interval even when multiple users access concurrently. Priority stream[Activation]Select "On" or "Off" to determine whether or not to usethe priority stream.Default: OffNote:• When "On" is selected for "Activation" of "Prioritystream", number of users who can access the cam-era will be limited.[Destination IP address(1)]Enter the first destination IP address.[Destination IP address(2)]Enter the second destination IP address.[Stream type]Select either "JPEG", "H.264/MPEG-4(1)" or "H.264/MPEG-4(2)".JPEG: JPEG images will be transmitted.H.264/MPEG-4(1): H.264 (1) (or MPEG-4(1)) imageswill be transmitted.H.264/MPEG-4(2): H.264 (2) (or MPEG-4(2)) imageswill be transmitted.Default: JPEGNote:• "JPEG" is available only when "1.3 mega pixel" isselected for "Image capture mode".[Refresh interval*]Select the refresh interval from the following.This setting is validated only when "JPEG" is selectedfor "Stream type".0.1fps/0.2fps/0.33fps/0.5fps/1fps/2fps/3fps/5fps/6fps/10fps/15fps */30fps *Default: 1fpsNote:• When "On" is selected for "H.264 (or MPEG-4)transmission", the transmission interval may belonger than the set value when any value with anasterisk (*) on the right is selected.[Image capture size]Select the image capture size from the following.This setting is validated only when "JPEG" is selectedfor "Stream type".QVGA/VGA/1280x960Default: 1280x960
