37Configure the settings relating to H.264 images [JPEG/H.264]Click the [JPEG/H.264] tab on the "Image/Audio" page. ( pages 20 and 21: How to display/operate the setupmenu)[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Image quali-ty", etc. in this section.Refer to page 40 and 36 for the settings relating to MPEG-4 images and JPEG images respectively.[Video encoding format]Select "H.264" or "MPEG-4" for the video encoding for-mat.H.264: H.264 will be set for the video encoding format.The subsequent setting items will be for H.264. Thetab name will be changed to [JPEG/H.264].MPEG-4: MPEG-4 will be set for the video encoding for-mat. The subsequent setting items will be for MPEG-4. ( page 40) The tab name will be changed to[JPEG/MPEG-4].Default: H.264 H.264(1) · H.264(2)[H.264 transmission]Select "On" or "Off" to determine whether or not totransmit H.264 images.On: Transmits H.264 images.Off: Does not transmit H.264 images.Default: OnNote:• When "On" is selected for "H.264 transmission" in“H.264(1)”, displaying of both H.264 images andJPEG images on the “Live” page will become avail-able.• When "On" is selected for "H.264 transmission" in"H.264(1)" and "H.264(2)", H.264 images are view-able using other devices with each setting.• When “On” is selected for “H.264 transmission” in“H.264(1)” or “H.264(2)”, the transmission interval ofJPEG images may sometimes become longer.[Internet mode (over HTTP)]Select "On" when transmitting H.264 images via theInternet. It is possible to transmit H.264 images withoutchanging the broadband router settings configured forJPEG image transmission.On: H.264 images and audio will be transmitted usingthe HTTP port. Refer to page 73 for further informa-tion about the HTTP port number settings.
