27[Save trigger]Select a trigger to save images on the SD memory cardfrom the following.FTP error: Saves images when images have failed totransmit to the FTP server by the FTP periodicimage transmission function.Alarm input: Saves images at an alarm occurrence.Manual: Saves images manually.Default: FTP errorNote:• Select "FTP error" when images are to be transmit-ted to the FTP server at an alarm occurrence.[Overwrite]Determine whether or not to overwrite when the SDmemory card becomes full.This setting is available only when "Manual" is selectedfor "Save trigger".On: Overwrites when the SD memory card becomesfull. (The oldest image is the first to be overwritten.)Off: Stops saving images on the SD memory card whenthe SD memory card becomes full.Default: OffNote:• The overwrite setting will be as follows according tothe "Save trigger" setting.FTP error: Will not be overwritten.Alarm input: Will be overwritten.Manual: Can be determined by selecting "On" or"Off" for "Overwrite".[File name]Enter the file name used for the image to be saved onthe SD memory card. The file name will be as follows.File name: ["Entered file name" + "Time and date(year/month/day/hour/minute/second)"] + "Serialnumber"Available number of characters: 1 - 8 charactersNote:• When "FTP error" is selected for "Save trigger", thefile name entered for "File name" on the [FTP img.trans.] tab of the "Network" page will be used for thefile name of the image saved on the SD memorycard.[Image saving interval/Number of images to besaved]• Image saving intervalWhen "Alarm input" or "Manual" is selected for "Savetrigger", select an interval (frame rate) of saving imageson the SD memory card from the following.0.1fps/0.2fps/0.33fps/0.5fps/1fpsDefault: 1fps• Number of images to be savedSelect a number of alarm images to be saved on the SDmemory card from the following.10pics/20pics/30pics/50pics/100pics/200pics/300pics/500pics/1000pics/2000pics/3000picsDefault: 100picsNote:• "Number of images to be saved" can be configuredonly when "Alarm input" is selected for "Save trig-ger".[Image capture size]When "Manual" is selected for "Save trigger", determinethe resolution of image to be saved on the SD memorycard from "QVGA", "VGA" or "1280x960".Default: VGANote:• When "FTP error" is selected for "Save trigger",images will be saved with the image capture sizeselected on the [FTP img. trans.] tab of the"Network" page.• When "Alarm input" is selected for "Save trigger",images will be saved with the image capture sizeselected on the [Alarm] tab of the "Alarm" page.• "QVGA" is available only when "1.3 mega pixel" isselected for "Image capture mode".
