Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 37 page image

37Configure the settings relating to the mail notification [Notification]Click the [Notification] tab on the "Alarm" page. ( pages 4 and 5: How to display/operate the setup menu) Mail notificationThe settings relating to the alarm mail can be configuredin this section. To provide notification of an alarm occur-rence by e-mail, it is necessary to configure the settingsof the mail server. ( page 42)[Mail server >>]When "Mail server >>" is clicked, the [Mail] tab of the"Server" page will be displayed. ( page 42)[Mail notification]Select "On" or "Off" to determine whether or not to pro-vide notification of an alarm occurrence by e-mail at analarm occurrence.Default: Off[Alarm image attachment]Select "On" or "Off" to determine whether or not toattach an image to the mail to be sent.Default: OffNote:The settings for "Image capture size" of the "Alarmimage" section on the [Alarm] tab ( page 33) willbe applied to the size of the image to be attached. Destination of notification[Alarm][Diag.][Destination address]Enter the destination address. Up to 4 destinationaddresses can be registered.To provide notification by e-mail when an alarm hasoccurred, check the "Alarm" checkbox respective to thedesired address.To provide notification by e-mail when any of the follow-ing has occurred, check the "Diag." checkbox respectiveto the desired address.• When notification of the remaining capacity of theSD memory card has been provided ( page 10)• When the SD memory card has become full• When mounting of the SD memory card failedTo delete the registered address, click the [Delete] but-ton respective to the desired address.Number of characters for the destination address:3 - 128 characters[Mail subject]Enter the mail subject.Number of characters for the mail subject: 0 - 50characters[Mail body]Enter the mail body.Number of characters for the mail body: 0 - 200 char-actersNote:Notification mail will be sent with the following mes-sage. (The message to be sent differs depending onthe status of the SD memory card.)• "The SD memory card is full." (This message willbe sent when the SD memory card becomesfull.)• "The SD memory card cannot be recognized."(This message will be sent when the SD memorycard has failed to mount.)