Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 30 page image

30Configure the multi-screen settings [Multi-screen]Assign cameras to be displayed on a multi-screen [Multi-screen setup]The cameras to be used for the multi-screen display can be registered on this page.Refer to the operating instructions (PDF) for descriptions of how to display images on a multi-screen.The following cameras are applicable for the multi-screen display. (as of April 2008)WV-NF284 series, WV-NS202 series, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-NS320 series, WV-NW484S series, WV-NS950 series, WV-NW960 series[IP address]Enter the IP address or the host name of the camera tobe used for the multi-screen. 4 cameras can be regis-tered as a group and up to 4 groups (16 cameras) canbe registered.When the HTTP port number for the camera hadbeen changed, enter as follows: Enter "IP addressof the camera:port number", for example:Example when entering an IPv4 address:192.168.0.10: 8080Example when entering an IPv6 address:[2001:db8:0:0:0:0:0:1]:8080Number of characters for the IP address: 1 - 128charactersNotes:• When using the host name, it is necessary to config-ure the DNS settings of the PC to be used for themulti-screen display. ( page 46)• When using Windows XP SP2, enter an IPv4address. Images from the camera may not be dis-played correctly if an IPv6 address is entered.[Camera title]Enter the title of the camera. The entered camera titlewill be displayed on a multi-screen.Number of characters for the camera title: 0 - 20charactersNote:When selecting a 16 split-screen, some charactersof the camera title to be displayed may not be dis-played.