Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 38 page image

38Configure the settings relating to Panasonic alarm protocolClick the [Notification] tab on the "Alarm" page. ( pages 4 and 5: How to display/operate the setup menu) Panasonic alarm protocol notificationThe settings relating to Panasonic alarm protocol canbe configured in this section.[Panasonic alarm protocol]Select "On" or "Off" to determine whether or not to pro-vide notification of an alarm occurrence by Panasonicalarm protocol when an alarm is detected.Default: OffNote:When "On" is selected, notification of the alarmoccurrence will be provided to the registered desti-nation addresses in order (to IP address 1 first, to IPaddress 8 last).[Destination port]Select a destination port for the Panasonic alarm proto-col from the following.Available port number: 1 - 65535Default: 1818[Retry times]Select a retry time for the Panasonic alarm protocol.Available retry times: 0 - 30Default: 2 Destination of notification[Alarm][Diag.][Destination IP address]Enter the destination IP address of the Panasonic alarmprotocol from the following. Host name is unavailable forthe destination IP address. Up to 8 destination address-es can be registered.To provide notification at an alarm occurrence to thedesired IP address using Panasonic alarm protocol,check the "Alarm" checkbox respective to the desired IPaddress.To provide notification using Panasonic alarm protocolwhen any of the following has occurred, check the"Diag." checkbox respective to the desired address.• When notification of the remaining capacity of theSD memory card has been provided ( page 10)• When the SD memory card has become full• When mounting of the SD memory card has failedTo delete the registered IP address, click the [Delete]button respective to the desired IP address.Important:• Confirm that the destination IP addresses are regis-tered correctly. When a registered IP address doesnot exist, notification may be delayed.• Host name is not available to set as the destinationIP address. Enter IPv4 address or IPv6 address for"Destination IP address".