Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 31 page image

31Configure the alarm settings [Alarm]The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarmoccurrence notification, and the VMD area settings can be configured on this page.The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.The terminal alarms indicate the EXT I/Os respectively ( Installation guide).Configure the settings relating to the alarm [Alarm]Click the [Alarm] tab on the "Alarm" page. ( pages 4 and 5: How to display/operate the setup menu)Refer to pages 32 and 34 for further information about the settings relating to the alarm image and the alarm outputterminal. AlarmThe settings relating to the alarm can be configured in this section.[Terminal alarm]Determine whether or not to use the terminal alarm byselecting "On" or "Off".On: Uses alarm.Off: Does not use alarm.Default: Off[VMD alarm]When the [VMD >>] button is clicked, the [VMD] tabpage ( page 35) will be displayed.[Command alarm]• Command alarmDetermine whether or not to use the command alarm byselecting "On" or "Off".The command alarm is the function that provides notifi-cation of a Panasonic protocol alarm from the othercameras. When "On" is selected, alarm actions will beperformed between multiple cameras.Default: Off• Originating port numberSelect a port number to be used to receive the com-mand alarm.Available port number: 1 - 65535Default: 8181