Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 35 page image

35[Area]When selecting an area to create the first VMD area onimages, the selected area will be set as VMD area 1.The subsequently created VMD areas will be set innumerical order (2-4).[Status]Select "On" or "Off" to determine whether or not to acti-vate each VMD area.On: Activates the respective VMD areaOff: Inactivates the respective VMD areaDefault: Off[Detection area]Adjust the size of the VMD area using the slider.The smaller the selected value is, the higher the sensi-tivity of VMD area becomes.The current value (1-10) will be displayed on the right ofthe slider.Available value: 1-10Default: 1[Detection sensitivity]Adjust the sensitivity of motion detection in the VMDarea using the slider.The larger the selected value is, the more the sensitivity(responsiveness) of the VMD area increases.The adjusted value will be applied to all of the VMDareas (1-4).The current value (1-15) will be displayed on the right ofthe slider.Available value: 1 (low)-15 (high)Default: 8[Delete] buttonClick the [Delete] button respective to the VMD area tobe deleted.The outline of the VMD area will disappear.Even after the outline of the VMD area disappeared, therespective VMD area will not be deleted until the [Set]button is clicked.Notes:• When motion is detected, the alarm occurrence indi-cation button ( Operating instructions) will be dis-played.• When received a terminal alarm or a commandalarm, the alarm occurrence indication button( operating instructions) will be displayed.• Even when "Real time" is selected for "Alarm statusupdate mode" ( page 9) on the [Basic] tab page ofthe "Basic" page, notification of the VMD alarm maysometimes not be provided in real time dependingon the network environment.• Motion of objects can be detected only when motionrange is larger than 1/192 (12 (V) x 16 (H)) of thescreen.Set the VMD areas [VMD area]Click the [VMD area] tab on the "Alarm" page. ( pages 4 and 5: How to display/operate the setup menu)The video motion detection areas can be set on this page.The following are descriptions of how to set areas to detect motion of objects using the VMD function.Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.