Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 79 page image

• When turning on the power of this unit or when con-necting the LAN cable to the network port when thecamera is active, images may not be displayed/recorded in a normal manner for around a minute (ata maximum) just after turning on the power of this unitor after connecting the LAN cable to the network port.79• Images recorded at low recording rate (less than 1ips) may sometimes not be refreshed.Cause/solution• The buttons may not be displayed orderly if the fontsetting of Windows has been changed from thedefault setting.Use with the default font setting.• Depending on the traffic of the network, there mightbe difficulties in displaying images. Press the [F5] but-ton on the keyboard to request images.• Reload the contents by pressing the [F5] key.Some contents are not dis-played on the browser.The image is not beingrefreshed.Live/recorded images inMPEG-4 format are not dis-played in a normal manner.Audio is not recordedAudio is not be played cor-rectly–––• Is "Mic input" selected for "Audio mode" on the setupmenu of the network camera?• Is "32 kbps" selected for "Audio bit rate" on the setupmenu of the network camera?Check the settings of the camera.––ReferencepagesSymptomThe buttons on the browserare displayed out of align-ment.–No SD memory data is dis-played in the recordingevent list.• It is impossible to play SD memory data from therecording event list or time and date search result.After filtering by "SD memory" in the recording eventlist, select an event to play it.–• The recording time of SD memory data will be dis-played based on the clock of the camera. Check theclock of the camera.–Cannot play SD memorydata.• When the SD memory data contains not manyframes, playback sometimes may not be performed ina normal manner.In this case, display the image with frame playback/reverse frame playback.–