Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 40 page image

40Screenshot 2The "Program Setup" window will be displayed. Step 2Perform the settings for each item.Refer to the following for further information about thesettings for each item.Step 3Click the [SET] button after completing the settings, andclose the window by clicking the [×] button at the topright of the window.Setup items Copy the Other Program SetupWhen it is necessary to copy the settings of the otherprogram, select the desired program (source of the set-tings) and click the [Copy] button. RECORDER SETUPPerform the settings such transmission rate of "LIVEVIDEO" for each camera channel, and recording rate ofeach recording type, etc.[LIVE VIDEO]Select the transmission rate of live images.OFF/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-FrameWhen "OFF" is selected, live image transmission will notbe performed.[MANUAL REC]Select the recording rate for manual recording.OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-FrameOFF: Manual recording will not be performed.[SCHEDULE REC]Select the recording rate for schedule recording fromthe following.OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-FrameOFF: Schedule recording will not be performed.[EVENT REC]Performs the settings for the recording rate and record-ing duration for pre-event recording and post-eventrecording.The following are available for "Recording Rate".OFF/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-FrameOFF: No recording will be performed.Important:Depending on the timing of an event occurrence, therecording duration of the recorded data may not beexactly same as set recording duration for the post-event recording.Note:"ALL" is unavailable for the recording rate of pre-event recording when the compression method ofthe camera is M-JPEG.The following recording duration can be set.• Pre-event recording (PRE-EVENT)2 s/5 s/10 s/20 s/30 s• Post-event recording (POST-EVENT)2 s/5 s/10 s/20 s/30 s/1 min/2 min/3 min/5 min/10 minMANUAL: Recording will be performed while alarmsignals (site alarm, terminal alarm, commandalarm) are being supplied.CONTINUE: Recording will not stop until the [ALM]button is clicked.