Panasonic WJ-ND200K Setup Instructions

Also see for WJ-ND200K: Operating instructions Operating instructions

Contents

Panasonic WJ-ND200K Setup Instructions Manual pdf 38 page image

38Perform the settings for site alarm [Site Alarm Setup]Perform the settings relating to the site alarm such as the setting to validate or invalidate the alarm from cameras,the port number used for receiving the alarm, and the event actions for each camera channel at an alarm occur-rence.Screenshot 1Click the [Event] button in the "Setup" panel and thenclick the "Site Alarm Setup" tab. The "Site Alarm Setup"page will be displayed.Step 1Perform the settings for each item. Site AlarmSelect "ON" or "OFF" whether to validate or invalidatethe site alarm.ON: Validates the site alarm.OFF: Invalidates the site alarm. Port Number (from Camera)Designate the port number to be used for receiving thesite alarm. Site Alarm SetupPerform the settings for the following items for eachcamera channel.[REC CAM]Performs the settings for a camera channel used forrecording.[PRESET]Enter the preset position (1 - 256) to which the camerawill move at a terminal alarm occurrence for each cam-era.When no position is selected (blank), the camera doesnot move to any preset position.[Output Terminal]Select the output terminal (--, TRM1 - TRM16) that out-puts alarm signals at an alarm occurrence. When "--" isselected, alarm signals will not be output.Step 2Click the [SET] button after completing the settings.