31 GO TO LAST beforeSelect a time to be skipped to when the [GO TO LAST]button is clicked from the following.5 s/10 s/30 s/1 min/5 min Buzzer (Error)Perform the settings for sounding a buzzer at an erroroccurrence.OFF: A buzzer will not sound at an error occurrence.2 s/5 s/10 s/20 s/30 s/1 min: The buzzer that startedsounding at an error occurrence will sound for theselected period.EXT: The buzzer will start sounding when a troubleoccurs and it will keep on sounding until the [ERR]button is clicked or the [BUZZER STOP] button onthe front panel is pressed.Perform the settings for the time and date [Time & Date]Perform the settings for the time and date.Screenshot 1Click the [System] button on the "Setup" panel and thenclick the "Time & Date" tab. The "Time & Date" page willbe displayed.Step 1Perform the settings for each item.Refer to the following for further information about thesettings for each item.Step 2Click the [SET] button after completing the settings. Shutdown TimeDetermine when the safe shutdown starts after a poweroutage alert signal is supplied to this unit.10 s/20 s/30 s/1 min/2 min/3 min/4 min/5 min

Preface

About these operating instructions

Trademarks and registered trademarks

Operations Flow

Performing the Network Settings of a PC

About the Network Security of This Unit

Display the Operation Window

About the Operation Window

Control] button

Cam Select] button

Setup] button

Status display area

Playback point operation area

CAM] Tab

Setup Menu

Basic operation with the setup menu

Perform the minimum required settings [Quick]

Perform the settings for the system [System]

Functions for the emergency recording [Emergency REC]

Functions for events [Event]

Settings for the recording/event schedule [Schedule]

Settings relating to cameras [Camera]

Settings relating to network [Comm]

Settings relating to the authentication [User Mng.]

Settings for maintenance [Maintenance]

Settings relating to the disk configuration [Config]

Troubleshooting

Panasonic WJ-ND200K Setup Instructions

operating instructions

About these Operating Instructions

Trademarks and Registered Trademarks

Recording/Playback/Live Image Transmission

Restrictions when operating MPEG-4 images

Operational Mode

Switch the operational mode from the mirroring mode to the single mode

Hard Disk Drive Management

Format (initialize) the hard disk drive in the single mode)

Recording

Playback

Start playback from a designated time and date

Search and Play Recorded Event

How to Operate

Monitor Live Images

Display Images from Cameras on a 4-Screen

Display Images in the Sequential Display

Control Cameras

Zoom/Focus/Brightness Operations

Move a Camera to the Preset Position

About the Event Function

Cancel the Alarm Action

Cancel the Error Status

Hard Disk Manually

Display/Edit the Text Information

Transmits Camera Images onto an FTP Server

Check Logs

Check the Access Log

Check the Event Log

Check the Network Log

Obtain Images on an SD memory card

Download Recorded Images

Play Downloaded Images

Install the Viewer Software

Uninstalling the Viewer Software

Save Downloaded Images

Print the Displayed Image

Perform the Alteration Detection

Notification by E-Mail

About the Error Log

When the Error Log is Displayed

WJ-ND200K

WJ-ND200K/G

Panasonic WJ-ND200K Setup Instructions

Product

Learn More

Legal