23Setup items Description PageCommBasic Setup Perform the settings for a network. Settings for a network con-nection such as settings of the IP address and gateway addresscan be performed.DDNS Setup Perform the basic settings of network DDNS.Determine to enable or disable DDNS, or perform the settings ofthe user IDs.Proxy Setup Perform the basic network proxy settings.Determine whether or not to use the proxy server, and performthe settings such as the server address settings, etc.SNMP Setup Perform the settings for the SNMP. By connecting to the SNMPmanager, the status check of the unit can be checked.NTP Setup Perform the settings when adjustment of the time is required tobe set with the NTP server such as when setting the NTP serveraddress.FTP Setup Perform the settings for the FTP server. Settings for transmittingimages from a camera connected to this unit to a designatedFTP server periodically can be performed with the "FTP Setup"menu.Mail Setup Perform the settings to send e-mails to addresses registered inadvance at an event or error occurrence.Panasonic Alarm protocol It is possible to send a message to addresses registered inadvance using "Panasonic Alarm Protocol" when an event or aproblem occurs.User Mng.Basic Setup Determine whether to enable or disable the user authenticationand the host authentication.Administrator Setup Edit information of the registered administrators such as theadministrator name, password, the default screen, etc.User Setup Register users who can operate the unit and edit/delete the reg-istered user information.User name, password and operational level can be set.Host Setup Register hosts (PCs) that can access the unit via a network andedit/delete the registered host information.Operational levels and IP addresses of PCs can be set.User Level Functions operable in each user level can be set.55575859606163646566676870