67Disc / Card Operation Front viewM E N UA D J . S E T U P F U N C .D V D / S DOKPAGERETURN1 Press MENU in Stop mode, then press ◄► to select“FUNC.”2 Press ENTER.3 Press ▲▼◄► to select “SETUP” and press ENTER.• You can also press DVD SETUP to enter the setup mode.If necessary, refer to “Summary of settings” on next page.DVD SDPlay backRecordDubbing/ EditSet upDISC PROTECTION OFFCARTRIDGE PROTECTION OFFDVD-RAMDIRECT NAVIGATORTIMER RECORDINGDUBBINGPLAY LISTSETUPFLEXIBLE RECORDINGDISC SETTINGe.g., DVD-RAMIf you change “Recording Timein EP Mode”.4 Press ▲▼ to select the Menus tab and press ◄►.LanguageRatingsRecording Time in EP ModePlay DVD-Audio in Video ModeLevel 8EP (8H)OffSET UPDiscVideoAudioMenus tab5 Press ▲▼ to select the Items and press ENTER.LanguageRatingsRecording Time in EP ModePlay DVD-Audio in Video ModeLevel 8EP (8H)OffSET UPDiscVideoAudioItems6 Press ▲▼ to select an Option and press ENTER.• Some options require different operations. Follow the displayedinstructions.EP (6H)EP (8H)Recording Time in EP ModeSET UPDiscVideoAudioOptionsProcedureChanging the Unit’s Settings To return to the previous screenPress RETURN. Even if you have changed an option, thechange is not activated until you press ENTER. To exit the screenPress RETURN several times.Note:• The settings remain intact even if you switch the unit to standby.POWER▲▼◄►RETURNENTERDisc Tray SD Card SlotMENUDVD SETUP