34 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Front viewBefore using Disc/Card Functions1 Confirm that disc or card is inserted.2 Press DVD or SD to select the drive.• The “DVD” or “SD” indicator flashes on the Front Display.• The DVD or SD indicator on the unit lights.3 Each operation is carried out.Or1 Press OPEN/CLOSE on the unit to open the tray andinsert a disc.• Press the button again to close the tray.Insert label-up.Insert inside the tray’s guide. Non-cartridge discInsert label-up with thearrow facing in. Cartridge discNotes:• Load double-sided discs so the label for the side you want to record/play isfacing up.• When using 8 cm (3˝) DVD-RAM, remove the disc from the cartridge andinsert it, making sure you align it with the groove.Inserting a DiscDisc trayInserting/Removing the CardOnly insert or remove the card after turningthe unit off.When the “SD” indicator on the unit display is flashing, the card isbeing read from or written to. Do not turn off the power or removethe card. Such action may result in malfunction or loss of thecard’s contents. Inserting the CardInsert the Card (labeled side up, cropped cornerright) and hold in place until you here a click.cropped corner Removing the CardPress the center of the Card and then pull itstraight out.Before Using the Disc or CardDRIVE SELECT–DVDDRIVE SELECT–SDOPEN/CLOSEDVDIndicatorSDIndicatorDisc Tray SD Card SlotFrontDisplay