Panasonic VL-SW250BX Operating Instructions Manual

Also see for VL-MW250BX: Installation guide Installation guide

Contents

Panasonic VL-SW250BX Operating Instructions Manual Manual pdf 33 page image

Programming33Adjusting the ringer volumeYou can adjust the following ringer volumes by using the main monitor station or the sub monitor station duringstandby.LThe ringer heard when receiving calls from the door station. (3 levels and “OFF” are available.)LThe ringer for paging calls. (3 levels are available.)Main monitor station1 Press {MENU}, then select “RING TONESETTINGS” by pressing {VOLUME} (▲ ) or{PAGE} (▲).2 Press {MENU} (OK), then select “RING VOLUME”by pressing {VOLUME} (▲ ) or {PAGE} (▲).3 Press {MENU} (OK), then select the desired itemto change the setting by pressing {VOLUME} (▲ )or {PAGE} (▲).DOOR STATIONPAGE4 Press {MENU} (OK), then select the desiredvolume by pressing {VOLUME} (▲ ) or{PAGE} (▲).RING VOLUME/DOOR STATION●HIGHMEDIUMLOWOFFCurrentsettingLThe ringer sounds at the selected volume level.– When “OFF” is selected, 2 short beeps sound.5 Press {MENU} (OK).L“r” moves to the selected item.6 To end the operation, press {OFF}.Note:LYou can also adjust the ringer volume whilereceiving a call.1 Press {VOLUME}.RING VOLUME2 Press {PAGE} (-) or {MENU} (+).*1LYou can also adjust the ringer volume for calls fromthe door station during standby.Press {VOLUME}. Ä Press {PAGE} (-) or{MENU} (+).* 1* 1 To turn off the ringer volume for calls from the doorstation, press and hold {PAGE} (-) until 2 shortbeeps sound.– To turn the ringer on, press {MENU} (+).Sub monitor station1 Press {MENU}, then select “RING VOLUME” bypressing {▲ } or {▲}.2 Press {D} (OK), then select the desired item tochange the setting by pressing {▲ } or {▲}.DOORPAGE3 Press {D} (OK), then select the desired volume bypressing {▲ } or {▲}.VOLUME/DOOR●HIGHMEDIUMLOWOFFCurrentsettingLThe ringer sounds at the selected volume level.– When “OFF” is selected, 2 short beeps sound.4 Press {D} (OK).L“r” moves to the selected item.5 To end the operation, press {OFF}.Note:LYou can also adjust the ringer volume whilereceiving a call by pressing {▲ } or {▲}.* 1* 1 To turn off the ringer volume for calls from the doorstation, press and hold {▼} until 2 short beepssound.– To turn the ringer on, press {▲}.