Panasonic VL-SW250BX Operating Instructions Manual

Also see for VL-MW250BX: Installation guide Installation guide

Contents

Panasonic VL-SW250BX Operating Instructions Manual Manual pdf 19 page image

Doorphone19Features during a call or while monitoringScrolling an image right or left on thesub monitor stationSub monitor station only1 Press {▲ } or {▲ }.LThe displayed image is scrolled slightly to theright or left.Adjusting the display brightnessMain monitor station1 Press {MENU}, then select “BRIGHTNESS” bypressing {VOLUME} (▲ SELECT).2 Adjust the brightness by pressing {PAGE} (DARK)or {MENU} (BRIGHT).Sub monitor station1 Press {MENU}, then select “BRIGHTNESS” bypressing {▼} or {▲}.2 Press {D} (OK).3 Adjust the brightness by pressing {▲ } or {▲ }.Hiding the operation guidanceMain monitor station only1 Press {MENU}, then select “GUIDE OFF” bypressing {VOLUME} (▲ SELECT).2 Press {MENU} (OK).LThe guidance disappears from the displaytemporarily. It reappears when you performanother operation.Adjusting the volume of your voiceheard at the door stationYou can adjust the volume of your voice heard at thedoor station by setting the main monitor station.Main monitor station only1 Press {VOLUME}, then select “OUTGOING VOL”by pressing {VOLUME} (▲ SELECT).2 Adjust the volume by pressing {PAGE} (-) or{MENU} (+).Adjusting the speaker volumeMain monitor station1 Press {VOLUME}, then select “INCOMING VOL”by pressing {VOLUME} (▲ SELECT).2 Adjust the volume by pressing {PAGE} (-) or{MENU} (+).Sub monitor station1 Adjust the volume by pressing {▼} or {▲}.Speaking with the modified sound ofyour voice (Voice changer)Main monitor station1 Press {VOICE CHANGER}.L appears on the display.Sub monitor station1 Press {MENU}, then select “VOICE CHANGER”by pressing {▼} or {▲}.2 Press {D} (OK).L appears on the display.Note for and :LVoice changer mode is canceled after theconversation ends.LTo cancel the voice changer mode during aconversation, perform the operation above.