Doorphone21Transferring a callYou can transfer a door call between the main monitor station and the sub monitor station.LBoth the main monitor station and the sub monitor station can transfer a door call using the same operation.LWhen using multiple sub monitor stations, you can transfer a door call between the sub monitor stations.{PAGE}{MENU}XX{TALK} andindicator{OFF}{VOLUME}{D}{OFF}TALK indicator{▲ } {▲}{PAGE}{TALK}To transfer a call: To receive a transferred call:1 While talking to the visitor at the door station,press {PAGE} and talk to the paged party.LThe image taken by the door stationdisappears, and the TALK indicator flashes.1 When the paging call is heard, press {TALK}and talk to the paging party.2 Tell the paged party to receive the door call.Press {OFF}.LThe paged call is disconnected, and the pagedparty can talk to the visitor.2 When the image taken by the door station isdisplayed, talk to the visitor.LPress {OFF} to end the call.N When using multiple sub monitor stationsWhen you press {PAGE} in step 1, the following is displayed.Select the party that you want to page:: Press {VOLUME} (▲ ) or {PAGE} (▲), thenpress {MENU} (OK).: Press {▼} or {▲}, then press {D} (OK).Note:LThe visitor cannot hear voices during paging.LIf the paged party does not answer or you want to return to the door call during paging, press {TALK}.(Example: Main monitor station)SENDING DOOR STATION 1ALL STATIONSSUB MONITOR STATION 1SUB MONITOR STATION 2SUB MONITOR STATION 3SUB MONITOR STATION 4